Old Hand Fault Finder

Lock out, tag out, verify zero energy. Not a replacement for the manual or a qualified tech.

Danfoss VLT AutomationDrive FC 302 · Alarm WARNING/ALARM 4: Mains phase loss

What it means A supply phase is missing or supply imbalance is excessive; the input rectifier may also be faulty.

✓ Checked against the manual (Oct 2026): code and name match the official manual, printed page 84.

Troubleshooting

Troubleshooting steps for this code sit behind a short safety notice. Read it before you open them.

Before you troubleshoot

Please read and check each statement.

Old Hand Fault Finder provides general information only. It is not legal advice, engineering advice, or a substitute for a manufacturer’s manual, a qualified person, or your site’s written procedures.

Follow OSHA lockout/tagout requirements and your site’s written energy-control procedures. Follow the manufacturer’s manual for the exact drive and equipment in front of you.

Only qualified people should perform work that requires qualification. Old Hand gives no live-work guidance. For any live work, follow the manufacturer’s directions and your site’s procedures.

Old Hand makes no warranty about the completeness, accuracy, suitability, or results of this information. Use of this site is at your own risk.

Check all 5 statements

Source

Name as printed in the official Danfoss manual for the VLT AutomationDrive FC 302, printed page 84. Meaning and checks are reworded, not copied. Official manual (PDF). Codes and names can differ between firmware versions.