Yaskawa V1000 · Fault CPF14: Control Circuit Fault
What it means The CPU is operating incorrectly, for example from noise, indicating damaged or disturbed control hardware.
✓ Checked against the manual (Oct 2026): code and name match the official manual, printed page 269.
Troubleshooting
Troubleshooting steps for this code sit behind a short safety notice. Read it before you open them.
Troubleshooting
Safety first
Before troubleshooting: shut down the equipment, isolate every energy source, lock and tag the energy-isolating devices, release or restrain stored energy, and verify by try-out that all energy is neutralized before work begins.
Follow your site’s written energy-control procedure and the manufacturer’s manual. This is general information only and does not replace a qualified person, site safety requirements, or OSHA requirements.
Record the code and drive status before resetting.
Inspect relevant connectors, terminals, and control-board connections with zero energy verified.
Follow the exact manual diagnostic procedure; replace hardware only after qualified diagnosis.
Source
Name as printed in the official Yaskawa manual for the V1000, printed page 269. Meaning and checks are reworded, not copied. Official manual (PDF). Codes and names can differ between firmware versions.