Old Hand Fault Finder

Yaskawa V1000 · Fault CPF22: A/D Conversion Error

What it means The control circuit has an A/D conversion error caused by control-circuit damage.

✓ Checked against the manual (Oct 2026): code and name match the official manual, printed page 269.

Troubleshooting

Troubleshooting steps for this code sit behind a short safety notice. Read it before you open them.

Before you troubleshoot

Please read and check each statement.

Old Hand Fault Finder provides general information only. It is not legal advice, engineering advice, or a substitute for a manufacturer’s manual, a qualified person, or your site’s written procedures.

Follow OSHA lockout/tagout requirements and your site’s written energy-control procedures. Follow the manufacturer’s manual for the exact drive and equipment in front of you.

Only qualified people should perform work that requires qualification. Old Hand gives no live-work guidance. For any live work, follow the manufacturer’s directions and your site’s procedures.

Old Hand makes no warranty about the completeness, accuracy, suitability, or results of this information. Use of this site is at your own risk.

Check all 5 statements

Source

Name as printed in the official Yaskawa manual for the V1000, printed page 269. Meaning and checks are reworded, not copied. Official manual (PDF). Codes and names can differ between firmware versions.