What it means During Auto-Tuning, the torque reference exceeded 20% or no-load current exceeded 80% of the drive rated current.
✓ Checked against the manual (Oct 2026): code and name match the official manual, printed page 295.
Troubleshooting
Troubleshooting steps for this code sit behind a short safety notice. Read it before you open them.
Troubleshooting
Safety first
Before troubleshooting: shut down the equipment, isolate every energy source, lock and tag the energy-isolating devices, release or restrain stored energy, and verify by try-out that all energy is neutralized before work begins.
Follow your site’s written energy-control procedure and the manufacturer’s manual. This is general information only and does not replace a qualified person, site safety requirements, or OSHA requirements.
Verify motor nameplate data and tuning parameters against the manual.
Inspect motor wiring and ensure the approved tuning conditions are met.
Repeat tuning only under the manual’s qualified, guarded procedure.
Source
Name as printed in the official Yaskawa manual for the V1000, printed page 295. Meaning and checks are reworded, not copied. Official manual (PDF). Codes and names can differ between firmware versions.